Industrial Lubricants

STA-PUT ROCK DRILL OILS


These oils have been especially developed for the lubrication of air-operated drilling, mining and construction equipment. They have a natural affinity for wet or dry metal surfaces and form a tough, non-gumming film which reduces metal to metal contact and provides excellent protection from rust and corrosion. They have low Pour Points and are ideally suited to Canadian climatic conditions.

A rock drill lubricant must perform effectively under very adverse conditions – cold, wet, dusty and hot atmospheres. Maximum drill speed must also be maintained. The tool must work for long periods without excess wear, oil blow-by or corrosion. An untreated mineral oil just wont do; it requires a scientifically treated lubricant which wets out rapidly, which has a tough, adhesive film, and which resists gumming or fogging. The Sta-Put Oil Series has all these advantages – oil treated to increase film strength and to “stay put” with high “oiliness value.”

Sta-Put Oil Series is the standard of many large mines and contractors because they protect expensive hard-to-repair tools located in outlaying regions where maintenance is costly and time-consuming.

Sta-Put rock drill oils work in any type of oiler. These Oils wet out sufficiently to adhere to all surfaces within the machine. They don’t form gummy residues with either wet or dry air, and they don’t separate. Sta-Put oils cause a very minimum of fluid fiction, have sealing ability to prevent air blowing past the piston, and meet the low temperature specification for all operating requirements. The ability to resist corrosion is another important advantage of the Sta-Put Series of rock drill oils.

Sta-Put 320 MP

Is recommended for jackhammers and tractor mounted drills on construction and mining projects for normal use down to -28C and in underground mining on all types of drills up to 3” where the temperature does not exceed 15C; also where exhaust freezing is encountered.



Sta-Put 350 MP

Is recommended for jackhammers and tractor mounted drill on construction and open pit mining projects for normal use down to -18C and in underground mining on all types of drills over 3” and on smaller drills where mine temperatures constantly exceed 15C; also where exhaust freezing is encountered.



Sta-Put 370 MP

Is recommended for tractor mounted drills over 4” for open pit mining, construction projects and underground mining where temperatures range from -18C to 26C also where exhaust freezing is encountered.

FIRE RESISTANT HYDRAULIC FLUIDS

Houghto-Safe 520, 620

Premium water glycol based fire resistant hydraulic fluid. Fully Factory Mutual Approved, by FM Global, this product is preferred over mineral oil based hydraulic fluids for fire resistance.


Houghto-Safe 1120

An ISO 46 viscosity phosphate ester based, fire resistant hydraulic fluid. Fully Factory Mutual Approved, by FM Global, this product is preferred over mineral oil based hydraulic fluids for fire resistance


Houghto-Safe 1130

An ISO 68 viscosity phosphate ester based, fire resistant hydraulic fluid. Fully Factory Mutual Approved, by FM Global, this product is preferred over mineral oil based hydraulic fluids for fire resistance




Houghto-Safe 620 TY

Premium water glycol based fire resistant hydraulic fluid for the food industry. Fully Factory Mutual Approved, by FM Global, this product is preferred over mineral oil based hydraulic fluids for fire resistance.

This product is CFIA approved for incidental contact.




Cosmolubric HF-122


An ISO 46 polyol-ester based fire resistant hydraulic fluid. This product is "Specification Tested" by FM Global, which means it is a safer option than using mineral oil products.


Cosmolubric HF-130

An ISO 68 polyol-ester based fire resistant hydraulic fluid, approved by Factory Mutual for conditions under which a less hazardous hydraulic fluid is required.

BIODEGRADABLE HYDRAULIC OIL


Hydro-Drive B100

A low viscosity mineral oil based cutting fluid, fortified with sulphur and chlorine based EP additives


Hydro-Drive B150

An ISO 32 vegetable based, biodegradable hydraulic oil for use in environmentally sensitive areas


Hydro-Drive B245

A vegetable based, biodegradable hydraulic oil, formulated as an alternative to traditional mineral based AW-46 hydraulic oil in most industrial applications and environmentally sensitive areas.


Cosmolubric B220

A medium viscosity grade Vegetable Oil (natural ester) based fire resistant hydraulic fluid. This product is "Specification Tested" by FM Global, which means it is a safer option than using mineral oil products


Cosmolubric B230

A high viscosity grade Vegetable Oil (natural ester) based fire resistant hydraulic fluid. Fully Factory Mutual Approved, by FM Global, this product is preferred over mineral oil based hydraulic fluids for fire resistance